Watch a video demonstrating how to use a Thermal Process Controller
Thermal Process Controller
- Technical Specifications (PDF)
-
User Manual
(PDF) - Large Product Image
- Dimensioned Drawing
- Range of Operation
- Block Diagram
- Product Demonstration (Video)
- Request a Quote
The Thermal Process Controller is a self contained heating solution complete with heater, control, and regenerative air source. This unit is capable of temperatures up to 1200°F while generating airflows up to 10 SCFM and velocity up to 85 ft./sec.
Watch a video demonstration of this product
New and Improved Cool Touch™ Technology
Our CoolTouch™ just got a little bit cooler. Below are a few of the advantages of the CoolTouch™ found in this Thermal Process Controller:
- Increased efficiency
- Faster response time
- Lighter Weight
- Cooler exterior
Product Details
Thermal Process Controller - General Product Specifications
| Specification | Value / description |
|---|---|
| Maximum Wattage | 1.5kW |
| Power | 208V/240V, single phase |
| Output Temperature Range | 150°F - 1200°F |
| Flow Rate | 4.5 - 10.0 SCFM |
| Velocity at Nozzle | 20-85 ft/sec |
| Enclosure Dimensions | 16.38"L x 15.25"W x 11.25"H |
| Enclosure Material | Powder Coated Aluminum |
| Heater Material | Stainless Steel |
| Weight | 40 lbs |
| Repeatability | >1% |
| Control Accuracy |
Temperature, ± 3% Flow Rate, ± 2% Velocity, ± 5% |
Thermal Process Controller - Industries & Applications
The Thermal Process Controller accommodates multiple processes, including:
- Automotive Painting
- Adhesive Activation
- Air Drying
- Solder Removal
- Heat Staking
- Sterilization
- Web Drying
- Ink Drying
- Plastic Curing
- Metallization
- Heat Shrinking
- Hopper Drying
Thermal Process Controller - Dimensioned Drawing
Thermal Process Controller - Block Diagram
Thermal Process Controller - Range of Operation
You need to upgrade or install
Flash Player
in order to view the multimedia content on this page.
What Now?
Feel free to contact us and tell us about your heating needs.
OR
Make use of our tools and resources aimed at helping you make an informed decision.
Video Demo
Heat Transfer Through Convection Calculator
Calculate the heat flux, temperature requirement, or volume as follows:
ρ = density (lb/ft3)
V = volume flow rate (ft3/hour)
Cp = specific heat (Btu/lb°F)
Ta-Tb = temperature differential (°F)
Q = ρ x V x Cp x (Ta-Tb)
Fill in four values to determine the fifth.
Temperature Conversion Calculator
°F = ( ( ( °C * 9) / 5 ) + 32 )
°C = ( ( ( °F - 32) * 5 ) / 9 )