Quickship Inventory

We have a limited amount of inventory in stock. Please select the products of interest and contact us for more information. Inventory changes hourly and the number in stock listed here may not be representative of the actual number in stock. Feel free to give us a call at 828.684.3766 to check on the current quantity of the product you are interested in.

PURCHASE
Axial Fan Heater<br />(not UL Approved)
 
  • Axial Fan Heaters (Series AF-20) mount directly to square axial fans. The AF-20 heater housing uses the same mounting holes and functions as a guard for both heaters and fans. (Fans not included.)
  • Axial Fan Heaters are available in several sizes with a broad range of wattages and custom features. They are ideal for drying, curing and warming applications typically found in film processing, lab, and medical instruments.
  • The 3.1" and 4.7" size Axial Fan Heaters are UL recognized components under UL file number E154979. The 2.1" size is not UL approved.
60 watt 12 volt 2.4" Axial Fan heater. No thermostat with no thermal fuse AF-60-12-XX10-2.4 4 Order
Axial Fan Heater<br />(UL Approved)
 
  • Axial Fan Heaters (Series AF-20) mount directly to square axial fans. The AF-20 heater housing uses the same mounting holes and functions as a guard for both heaters and fans. (Fans not included.)
  • Axial Fan Heaters are available in several sizes with a broad range of wattages and custom features. They are ideal for drying, curing and warming applications typically found in film processing, lab, and medical instruments.
  • The 3.1" and 4.7" size Axial Fan Heaters are UL recognized components under UL file number E154979. The 2.1" size is not UL approved.
60 watt 48 volt 4.7" Axial Fan heater. No thermostat with no thermal fuse AF20-60-48-XX-36-4.7 9 Order
Axial Fan Heater<br />(UL Approved)
 
  • Axial Fan Heaters (Series AF-20) mount directly to square axial fans. The AF-20 heater housing uses the same mounting holes and functions as a guard for both heaters and fans. (Fans not included.)
  • Axial Fan Heaters are available in several sizes with a broad range of wattages and custom features. They are ideal for drying, curing and warming applications typically found in film processing, lab, and medical instruments.
  • The 3.1" and 4.7" size Axial Fan Heaters are UL recognized components under UL file number E154979. The 2.1" size is not UL approved.
1000 watt 200 volt Axial Fan Heater. No thermostat with no thermal fuse. AF20-1000-200-XX10-4.7 3 Order
Axial Fan Heater<br />(UL Approved)
 
  • Axial Fan Heaters (Series AF-20) mount directly to square axial fans. The AF-20 heater housing uses the same mounting holes and functions as a guard for both heaters and fans. (Fans not included.)
  • Axial Fan Heaters are available in several sizes with a broad range of wattages and custom features. They are ideal for drying, curing and warming applications typically found in film processing, lab, and medical instruments.
  • The 3.1" and 4.7" size Axial Fan Heaters are UL recognized components under UL file number E154979. The 2.1" size is not UL approved.
axial fn 200 watt 120 volt 149 degree thermostat and 104 degree thermal cutoff af20-200-120-1AF-24.4.7(022) 55 Order
Axial Fan Heater<br />(UL Approved)
 
  • Axial Fan Heaters (Series AF-20) mount directly to square axial fans. The AF-20 heater housing uses the same mounting holes and functions as a guard for both heaters and fans. (Fans not included.)
  • Axial Fan Heaters are available in several sizes with a broad range of wattages and custom features. They are ideal for drying, curing and warming applications typically found in film processing, lab, and medical instruments.
  • The 3.1" and 4.7" size Axial Fan Heaters are UL recognized components under UL file number E154979. The 2.1" size is not UL approved.
100 watt 120 volt Axial Fan Heater with

266F thermostat and 378F thermal fuse
AF-100-120-1HN10-2.4 24 Order
Cool Touch™ 150
 
  • The Cool Touch™ 150 Heat Torch is a robust air heating tool designed for high reliability, long life and substantial air flow. In-service applications include staking, curing, drying, heat-shrinking, sterilization, adhesive activation, air scrubbing and air knives.
  • The Cool Touch™ 150 Heat Torch heating element is contained in a 2.0" diameter stainless steel pipe. The heater body is 4.7" long for power ratings from 500 to 2500 watts, and 8.31" long for power ratings of 3000 to 5000 watts. The standard power increments are 250 watts and 500 watts, respectively.
  • Allowable air flow is from 4.8 to 70 SCFM. Maximum air input temperature is 250°F. Maximum air output temperature is 1300° F.
  • The standard inlet fitting is a 0.5" NPT female. Standard outlets include 0.25", 0.5" and 1" NPT female fittings and no exhaust fitting.
2000 watt 208 volt Cool Touch 150
Single Phase 1/2" NPT female inlet and
1" female exhaust fitting w/o
thermocouple
ct150-2000-208-1-1/2f-1f 1 Order
Crossflow Blower Heater
 
  • Developed for maximum design flexibility, Crossflow Blower Heaters (CB Series) utilize multi -purpose mounting brackets attaching directly to the exhaust of a crossflow blower without the need for additional accessories. Extra mounting holes make it possible for the heater to function as a stand-alone duct heater.
  • Single and dual wattage, and/or dual voltage combinations are available. Integrated thermal fuses and/or hi-limit thermostats are available to provide over-temperature protection.
  • Crossflow Blower Heaters are tailored to meet your specific heating requirements. We match size, wattage, and voltage to meet your specifications for optimal system performance.
  • Crossflow Blower Heaters are available in 5", 7", 10", and 12" standard lengths.
250 watt, 240v 7.91" Crossflow Blower Heater. No thermostat or fuse. With blower. CB-250-240-X-X-7-M-6-D-974 10 Order
Crossflow Blower Heater
 
  • Developed for maximum design flexibility, Crossflow Blower Heaters (CB Series) utilize multi -purpose mounting brackets attaching directly to the exhaust of a crossflow blower without the need for additional accessories. Extra mounting holes make it possible for the heater to function as a stand-alone duct heater.
  • Single and dual wattage, and/or dual voltage combinations are available. Integrated thermal fuses and/or hi-limit thermostats are available to provide over-temperature protection.
  • Crossflow Blower Heaters are tailored to meet your specific heating requirements. We match size, wattage, and voltage to meet your specifications for optimal system performance.
  • Crossflow Blower Heaters are available in 5", 7", 10", and 12" standard lengths.
1500 watt, 240v Crossflow Blower Heater. Thermostat at 212'f and fuse at 262'f. With blower. CB-1500-240-F-K-5-M-6-D-971 23 Order
Duct Heater 12
 
  • The rugged, efficient, open Frame Duct Heaters offer you the capability to heat large volumes of air with fast warm-ups and cool-downs.
  • Our open design provides low pressure drops with no build up of excessive temperatures and the low static pressures allow you to use smaller, more economical blowers.
  • Circuits are exposed directly to the air flow enabling immediate heat transfer from wire to air while remaining relatively cool themselves.
  • A range of sizes are available to meet your specific needs - including voltages up to 480 volts - single and three phase.
  • The Frame Duct Heaters have a long history of trouble free service and are easy to install.
3500 watt 240 volt 3 phase DH12-3500-240-3 1 Order
Duct Heater 13
 
  • The rugged, efficient, open Frame Duct Heaters offer you the capability to heat large volumes of air with fast warm-ups and cool-downs.
  • Our open design provides low pressure drops with no build up of excessive temperatures and the low static pressures allow you to use smaller, more economical blowers.
  • Circuits are exposed directly to the air flow enabling immediate heat transfer from wire to air while remaining relatively cool themselves.
  • A range of sizes are available to meet your specific needs - including voltages up to 480 volts - single and three phase.
  • The Frame Duct Heaters have a long history of trouble free service and are easy to install.
30000 watt 480 volt 3 phase duct heater DH13-30000-480-3 2 Order
Duct Heater 22
 
  • The rugged, efficient, open Frame Duct Heaters offer you the capability to heat large volumes of air with fast warm-ups and cool-downs.
  • Our open design provides low pressure drops with no build up of excessive temperatures and the low static pressures allow you to use smaller, more economical blowers.
  • Circuits are exposed directly to the air flow enabling immediate heat transfer from wire to air while remaining relatively cool themselves.
  • A range of sizes are available to meet your specific needs - including voltages up to 480 volts - single and three phase.
  • The Frame Duct Heaters have a long history of trouble free service and are easy to install.
30,000 watt, 240 volt, single phase duct heater. DH 22-30000-240-1 8 Order
Duct Heater 22
 
  • The rugged, efficient, open Frame Duct Heaters offer you the capability to heat large volumes of air with fast warm-ups and cool-downs.
  • Our open design provides low pressure drops with no build up of excessive temperatures and the low static pressures allow you to use smaller, more economical blowers.
  • Circuits are exposed directly to the air flow enabling immediate heat transfer from wire to air while remaining relatively cool themselves.
  • A range of sizes are available to meet your specific needs - including voltages up to 480 volts - single and three phase.
  • The Frame Duct Heaters have a long history of trouble free service and are easy to install.
700watt, 300v Duct Heater 22. DH22-700-300 1 Order
Flow Torch™ 200
 
  • The Flow Torch 200 is a 2" diameter stainless steel air heater designed for high flow rates at low pressure drops. It incorporates an open coil spiral wound element of the highest grade material which provides quick heat up and cool down cycles with maximum heat transfer.
  • The Flow Torch 200 is capable of operation with airflows of up to 115 SCFM and up to 120 PSIG. Maximum output temperature is 900°F (482°C). Standard power of 1 kW to 10 kW is available in 500 watt increments.
  • The Flow Torch 200 offers reliable, long-life performance and reduced operational costs. Applications include hot air curtains, air drying, baking, chemical processing, dehumidification, laminating, web drying, textile applications, ink drying, paint baking/ drying, plastic curing, metallization, exhaust gas heating, hopper drying and sterilization. Optional equipment includes thermocouple and thermocouple fittings, stainless steel inlet and outlet reducers for hose or pipe. Control Panels are also available to provide precise temperature regulation.
3000 watt, 240v, 3 phase Flow Torch 200. No fitting on inlet or exhaust. No thermocouples. FT200-3000-240-3-NF-NF-X 1 Order
Flow Torch™ 200
 
  • The Flow Torch 200 is a 2" diameter stainless steel air heater designed for high flow rates at low pressure drops. It incorporates an open coil spiral wound element of the highest grade material which provides quick heat up and cool down cycles with maximum heat transfer.
  • The Flow Torch 200 is capable of operation with airflows of up to 115 SCFM and up to 120 PSIG. Maximum output temperature is 900°F (482°C). Standard power of 1 kW to 10 kW is available in 500 watt increments.
  • The Flow Torch 200 offers reliable, long-life performance and reduced operational costs. Applications include hot air curtains, air drying, baking, chemical processing, dehumidification, laminating, web drying, textile applications, ink drying, paint baking/ drying, plastic curing, metallization, exhaust gas heating, hopper drying and sterilization. Optional equipment includes thermocouple and thermocouple fittings, stainless steel inlet and outlet reducers for hose or pipe. Control Panels are also available to provide precise temperature regulation.
1500 watt, 240 v Single Phase Flow Torch 200, 1 1/4" npt female inlet and exhaust with 1 thermocouple FT200-1500-240-1-1 1/4f-1 1/4f--TF1 1 Order
Flow Torch™ 200
 
  • The Flow Torch 200 is a 2" diameter stainless steel air heater designed for high flow rates at low pressure drops. It incorporates an open coil spiral wound element of the highest grade material which provides quick heat up and cool down cycles with maximum heat transfer.
  • The Flow Torch 200 is capable of operation with airflows of up to 115 SCFM and up to 120 PSIG. Maximum output temperature is 900°F (482°C). Standard power of 1 kW to 10 kW is available in 500 watt increments.
  • The Flow Torch 200 offers reliable, long-life performance and reduced operational costs. Applications include hot air curtains, air drying, baking, chemical processing, dehumidification, laminating, web drying, textile applications, ink drying, paint baking/ drying, plastic curing, metallization, exhaust gas heating, hopper drying and sterilization. Optional equipment includes thermocouple and thermocouple fittings, stainless steel inlet and outlet reducers for hose or pipe. Control Panels are also available to provide precise temperature regulation.
1500 watt 240 volt single phase Flow Torch 200, 1 1/4" NPT female inlet and exhaust with 1 thermocouple FT200-1500-240-1-1 1/4F- 1 1/4F-TF1 1 Order
Heat Torch™ 050, Ceramic
 
  • This 0.5" diameter Heat Torch™ 050 Heater is compact and reliable when moderate amounts of focused air are required.
  • The Heat Torch™ 050 Air Heater has allowable air flow ranging from 1 to 10 SCFM and is available in power ratings of 100 watts to 500 watts (with standard increments of 50 watts). Maximum air input temperature is 250°F (121°C) with 1300°F (704°C) maximum output.
  • Applications for Heat Torch™ 050 include staking, curing, drying, heat shrinking, sterilization, and adhesive activation.
500 watt 240 volt Heat Torch 050 Heater. With 1/8" female inlet fitting and exhaust. HT050-500-240-1/8-1/8-X 3 Order
Heat Torch™ 050, Ceramic
 
  • This 0.5" diameter Heat Torch™ 050 Heater is compact and reliable when moderate amounts of focused air are required.
  • The Heat Torch™ 050 Air Heater has allowable air flow ranging from 1 to 10 SCFM and is available in power ratings of 100 watts to 500 watts (with standard increments of 50 watts). Maximum air input temperature is 250°F (121°C) with 1300°F (704°C) maximum output.
  • Applications for Heat Torch™ 050 include staking, curing, drying, heat shrinking, sterilization, and adhesive activation.
500 watt 120 volt Heat Torch 050. 1/8" NPT female inlet with no exhaust fitting with 36" leads. HT050-500-120-1/8-NF (005-36) 9 Order
Heat Torch™ 050, Mica
 
  • This 0.5" diameter Heat Torch™ 050 Heater is compact and reliable when moderate amounts of focused air are required.
  • The Heat Torch™ 050 Air Heater has allowable air flow ranging from 1 to 10 SCFM and is available in power ratings of 100 watts to 500 watts (with standard increments of 50 watts). Maximum air input temperature is 250°F (121°C) with 1300°F (704°C) maximum output.
  • Applications for Heat Torch™ 050 include staking, curing, drying, heat shrinking, sterilization, and adhesive activation.
400 watt, 240v Heat Torch 050. Counterbore 1/2" female thread inlet with no exhaust fitting. HTM050-400-240-CB-NF 5 Order
Heat Torch™ 050, Mica
 
  • This 0.5" diameter Heat Torch™ 050 Heater is compact and reliable when moderate amounts of focused air are required.
  • The Heat Torch™ 050 Air Heater has allowable air flow ranging from 1 to 10 SCFM and is available in power ratings of 100 watts to 500 watts (with standard increments of 50 watts). Maximum air input temperature is 250°F (121°C) with 1300°F (704°C) maximum output.
  • Applications for Heat Torch™ 050 include staking, curing, drying, heat shrinking, sterilization, and adhesive activation.
400 watt, 120v Heat Torch 050. 3/8" NPT female inlet with no fitting on the exhaust. Non-standard tube length of 7.859". HTM050-400-120-3/8/F-NF(018) 523 Order
Heat Torch™ 050, Mica
 
  • This 0.5" diameter Heat Torch™ 050 Heater is compact and reliable when moderate amounts of focused air are required.
  • The Heat Torch™ 050 Air Heater has allowable air flow ranging from 1 to 10 SCFM and is available in power ratings of 100 watts to 500 watts (with standard increments of 50 watts). Maximum air input temperature is 250°F (121°C) with 1300°F (704°C) maximum output.
  • Applications for Heat Torch™ 050 include staking, curing, drying, heat shrinking, sterilization, and adhesive activation.
500W 120V, 1/2" dia., mica core, 3/8" dia. Counterbore inlet, free exhaust, 3-pin Lumberg connector, overall length of heater is 4.0" long. HTM050-500-120-CB-NF(040) 12 Order
Heat Torch™ 075, Ceramic
 
  • Our Heat Torch™ 075 is a 0.75" diameter compact air heater providing moderate amounts of focused air. Heat Torch™ 075 offers over twice the air flow capacity of the Heat Torch™ 050. The Heat Torch™ 075 can be mounted in either a horizontal or vertical position and includes several inlet and exhaust fittings options.
  • Heat Torch™ 075 will meet requirements for air flow ranging from 1.3 to 25 SCFM with power of 100 watts to 1000 watts [in 100 watts increments].
  • Maximum air input temperature is 250° F (121° C) with 1300° F (704° C) maximum output temperature.
  • Applications for Heat Torch™ 075 include staking, curing, drying, heat shrinking, sterilization, and adhesive activation.
1000 watt 120 volt Heat Torch 075. 1/4" NPT female inlet and exhaust w/o thermocouple HT075-1000-120-1/4F-1/4F-X 11 Order
Heat Torch™ 150
 
  • The Heat Torch™ 150 heating element is contained in a 1 1/2" diameter stainless steel pipe.
  • The Heat Torch™ 150 comes in two sizes. The 4.7" long heater body accommodates ratings from 500 to 2500 watts [with standard power increments of 250 watts]. The 8.3" long heater body handles ratings of 2750 to 5000 watts [with standard power increments of 500 watts].
  • Heat Torch™ 150 has allowable air flow ranging from 4.8 to 70 SCFM. Maximum air input temperature is 250°F (121°C) with 1300°F (704°C) maximum output temperature. Standard inlet fitting is 1/2" NPT female. Standard outlet fittings include 1/4", 1/2", and 1" female NPT fittings or no exhaust fitting.
  • Heat Torch™ 150 is designed for high reliability, long life, and substantial air flow. Applications include staking, curing, drying, heat-shrinking, sterilization, adhesive activation, air scrubbing, and air knives.
4000 watt, 240v Heat Torch 150. 1/2" NPT female inlet and exhaust. HT150-4000-240-1-1/2-1/2 2 Order