View our Full Thermal System Animation
Download Product Info in PDF Format
View Large Product Shot
View Dimensioned Drawing
Heat Torch™ 050
The half-inch diameter Heat Torch™ 050 process heaters are compact and highly-reliable air heaters for applications which require a modest amount of focused air. In-service applications include staking, curing, drying, heat-shrinking, sterilization, and adhesive activation.
The Heat Torch™ 050 process air heaters are available in power ratings from 100 to 500 watts with standard increments of 50 watts. Allowable air flow is from 1 to 10 Standard Cubic Feet per Minute. Maximum air input temperature is 250° F. Maximum air output temperature is 1300° F. Standard configurations include a choice of air inlet and exhaust fittings.
|
Wattage:
100-600 |
Voltage:
120V, 100-500W 240V, 200-600W 100V, 100-500W 200V, 200-550W |
Inlet Fittings:
1/8F - 1/8" NPT female 3/8F - 3/8" NPT female CB-Counterbore 1/2" dia. |
Exhaust Fittings:
1/8F - 1/8" NPT female 1/4F - 1/4" NPT female NF - no fitting |
Options:
|
|
Specifications
Max. wattage: 600 Max. exhaust air temp: 1300°F Max, inlet air temp: 250°F Max. SCFM: 10 Pressure rating: 120 PSIG Horizontal mounting Leads: 20 gauge, 12" long Construction Heater body: stainless steel Heater fittings: stainless steel |
Calculate the electrical power, flow rate or temperature requirement as follows:
Watts = SCFM x ΔT/3 SCFM = airflow in standard cubic feet per minute. Δ T = temperature rise in degrees F from the inlet to the exhaust. Watts = |
|
|
||||||||||||||||||||||||||||||||||||
Product Features/Ordering Information
|
|||||||||||||||||||||||||||||||||||||