Flow Torch™ 200

The Flow Torch 200 is a 2" diameter stainless steel air heater designed for high flow rates at low pressure drops. It incorporates an open coil spiral wound element of the highest grade material which provides quick heat up and cool down cycles with maximum heat transfer.
The Flow Torch 200 is capable of operation with airflows of up to 115 SCFM and up to 120 PSIG. Maximum output temperature is 900°F (482°C). Standard power of 1 kW to 10 kW is available in 500 watt increments.
The Flow Torch 200 offers reliable, long-life performance and reduced operational costs. Applications include hot air curtains, air drying, baking, chemical processing, dehumidification, laminating, web drying, textile applications, ink drying, paint baking/drying, plastic curing, metallization, exhaust gas heating, hopper drying and sterilization. Optional equipment includes thermocouple and thermocouple fittings, stainless steel inlet and outlet reducers for hose or pipe. Control Panels are also available to provide precise temperature regulation.

Not sure if this is the right solution for you? Use our Determine Your Heater tool to see which heaters meet your needs.

Build Your Own Heater

The builder below will allow you to select options for a Flow Torch™ 200. If you are uncertain if the Flow Torch™ 200 is right for you, please use the builder on the main Flow Torch page. If you are uncertain if a Flow Torch is the right solution for your needs, please learn about our other product offerings on our Standard Air Heaters page.

Watch a video demonstration of this tool

Builder Your Own Heater Tool Demonstration

Wattage

--
1000
1500
2000
2500
3000
3500
4000
4500
5000

Voltage

Phase

--
single
three

Inlet Fitting

--
no fitting
1 1/4" NPT female

Exhaust Fitting

--
no fitting
1 1/4" NPT female

Thermocouple Fitting

--
no t/c fitting
fitting with 1 t/c
fitting with 2 t/c
1 t/c fitting without t/c
2 t/c fittings without t/c

Part Number: FT200 - ? - ? - ? - ? - ? - ?

Flow Torch™ 200 - General Product Specifications

Specification	Value / description
Maximum Wattage	6kW
Maximum Exhaust Air Temperature	482° C (900° F)
Maximum Inlet Air Temperature	121° C (250°F)
Maximum SCFM	115
Pressure Rating	120 PSIG
Mounting	Horizontal / Vertical
Heater Body	Stainless Steel
Inlet Fittings	Stainless Steel
Exhaust Fittings	Stainless Steel