The 200 Cool Touch™ is an open coil air heater designed with internal baffles that direct cooler incoming air down the inside of the outer tube. This keeps the heater's exterior cooler thus making it safer for machine operators and other machine components. The Cool Touch™ triple pass design is also more energy efficient. The baffled incoming air absorbs heat from the interior tube that might be lost to the area on a single pass design. Some customers have installed these heaters inside their control panels with the outlet fitting exiting the cabinet.

The robust construction of this 2 1/2' diameter stainless steel heater offers reliable, long life performance and reduced operational cost. The 200 Cool Touch™ incorporates a spiral wound element of the highest grade material providing quick heat up and cool down cycles with the maximum transfer of heat to your process. Farnam Process Control Panels are available to provide precise temperature regulation for your application. Standard power of 1000 watts to 12500 watts is available in 500 watt increments for a wide range of applications that include: Adhesive Activation, Sterilization, Plastic Curing, Air Drying, Web Drying, Metallization, Solder Removal, Textile Applications, Heat Shrinking, Heat Staking, Ink Drying, or Hopper Drying.

The 200 Cool Touch™ is capable of operating with air flows up to 100 SCFM and up to 120 PSIG. Maximum output temperature is 704 °C(1300 °F) depending on air flow. Optional equipment available include thermocouple and thermocouple fittings, stainless steel inlet and outlet fittings, and controls.

---

Wattage: 500-4250 (5.0" heated length) 4500-8500 (9.0" heated length) 8750-12500 (13.0" heated length)

Voltage: 100V: max. 2250W 120V: max. 2500W 240V: single or three phase (single phase - max. 8500W) 480V: single or three phase

Inlet Fitting: 1F - 1" NPT female R1 = 1-11 BSPT Female Thread

Exhaust Fitting: 1 1/4F - 1 1/4" NPT female NF- no fitting R1-1/4=1-1/4-11 BSPT Female Thread

Options: Thermocouple fitting Thermocouple Heat Sheild Control panels

Specifications Max. wattage: 12500 Max. exhaust air temp: 1300°F Max, inlet air temp: 250°F Max. SCFM: 100 Pressure rating: 120 PSIG Horizontal mounting Leads: 12 gauge, 12" long Construction Heater body: stainless steel Inlet fitting: stainlesssteel Exhaust fitting: stainless steel

Calculate the wattage, flow rate or temperature requirement as follows: Watts = SCFM x ΔT/3 SCFM = airflow in standard cubic feet per minute Δ T = temperature rise in degrees F from the inlet to the exhaust

Wattage Minimum SCFM required 1000 9.6 4000 9.6 5000 12.4 6000 14.8 7000 17.0 8000 19.3 9000 21.4 10000 23.5 11000 25.5 12500 28.4	Airflow (SCFM) 500W-4250W 4500W-8500W 8750W-12500W Pressure Drop (PSIG) Pressure Drop (PSIG) Pressure Drop (PSIG) 10 0.6 1.2 1.8 20 1.6 3.2 4.8 30 3.0 6.1 9.1 40 4.9 9.8 14.7 50 7.2 14.3 21.5 60 9.8 19.7 29.5 70 12.9 25.8 38.7 80 16.4 32.9 49.3 90 20.4 40.7 61.1 100 24.7 49.4 74.1
Product Features/Ordering Information Wattage Voltage Phase Inlet Fitting Exhaust Fitting Optional Modification # CT 200 7500 480 3 1F 1 1/4 F (xxx)