Parti di questo sito tradotto da

fresco tocco™ Calore Torce

Farnam personalizzati Prodotti di produzione è stato di alta qualità in linea di riscaldamento per oltre due decenni. Decine di migliaia di questi dispositivi sono stati costruiti per molte aziende di Fortune 1000 su un ordine personalizzato base. Sulla base di questa esperienza e un aumento della domanda, abbiamo creato una famiglia di calore Torcia processo di riscaldamento modulare che può essere assemblato da un insieme di componenti di fornire il meglio di entrambi i standardizzazione e flessibilità.

Farnam Calore Torce in linea di aria calda sono ideali per rapidamente l'aria di riscaldamento. Industriale forza aprire bobina di riscaldamento a fornire efficiente trasferimento di calore attraverso il riscaldamento diretto contatto con l'elemento aria. Rapido tempo di risposta di riscaldamento consente il controllo preciso della temperatura di uscita di riscaldamento, quando questi sono associati con la piattaforma di sensori e controller. Robusto design, materiali di alta qualità e di lavorazione prevedono di lunga durata e le prestazioni margine.

Cool Touch Diagram

Il nostro altamente efficiente Cool Touch opzione minimizza la pelle temperatura del riscaldamento e aiuta a proteggere le persone e prodotto da superfici calde. Questo disegno efficiente riduce le perdite di calore.

La grande capacità di stoccaggio termico è particolarmente utile se si dispone di una applicazione che richiedono un uso intermittente e di risposta rapida. Questo Cool Touch

 

Cool Touch™ 050
View Product Page
CT050 PDFCT050 Infosheet (421kB)
 
  • The Cool Touch™ 050 features a triple-pass construction that minimizes skin temperatures on the heater. The high-efficiency design focuses heat where it's needed, protecting people and product from unnecessarily hot surfaces.
  • The triple-pass design offers superior performance in heat cycling applications due to its high internal thermal storage capacity. Outlet temperature quickly stabilizes when power is applied and regulation is easily maintained.
  • Our Cool Touch™ 050 is a 1" diameter heater which can provide up to 500 watts and handle up to 7.5 SCFM of air. Outlet temperatures up to 1300° F can be supplied for your heating requirements.
Cool Touch™ 050 500 W 250 °F 1300 °F 0.00 7.50 120
Cool Touch™ 150
View Product Page
CT150 PDFCT150 Infosheet (352kB)
 
  • The Cool Touch™ 150 Heat Torch is a robust air heating tool designed for high reliability, long life and substantial air flow. In-service applications include staking, curing, drying, heat-shrinking, sterilization, adhesive activation, air scrubbing and air knives.
  • The Cool Touch™ 150 Heat Torch heating element is contained in a 2.0" diameter stainless steel pipe. The heater body is 4.7" long for power ratings from 500 to 2500 watts, and 8.31" long for power ratings of 3000 to 5000 watts. The standard power increments are 250 watts and 500 watts, respectively.
  • Allowable air flow is from 4.8 to 70 SCFM. Maximum air input temperature is 250°F. Maximum air output temperature is 1300° F.
  • The standard inlet fitting is a 0.5" NPT female. Standard outlets include 0.25", 0.5" and 1" NPT female fittings and no exhaust fitting.
Cool Touch™ 150 5000 W 250 °F 1300 °F 4.80 70.00 120
Cool Touch™ 200
View Product Page
CT200 PDFCT200 Infosheet (447kB)
 
  • The Cool Touch™ 200 Heat Torch is a robust air heating tool designed to satisfy the most demanding requirements. In-service applications include high capacity staking, curing, drying, heat-shrinking, sterilization, adhesive activation, air scrubbing and air knives.
  • The Cool Touch™ 200 Heat Torch heating element is contained in a 2.5" diameter stainless steel pipe. The heater body is 5.0" long for power ratings from 500 to 4250 watts, 9.0" for power ratings of 4500 to 8500 watts, and 13.0" for power ratings from 9000 to 12500 watts. The standard power increments are 250 watts, 500 watts and 1000 watts respectively.
  • Allowable air flow is from 9.6 to 100 SCFM. Maximum air input temperature is 250° F. Maximum air output temperature is 1300° F.
  • The standard inlet fitting is a 1" NPT female. Standard outlets are a 1.25" NPT female fitting and no exhaust fitting.
Cool Touch™ 200 12500 W 250 °F 1300 °F 9.60 100.00 120

 



> Build Your Own Heater

The builder below will allow you to select options for a Cool Touch ™ Heat Torch™. If you are uncertain if a Cool Touch Heat Torch is the right solution for your needs, please learn about our other product offerings on our Standard Air Heaters page.

video iconWatch a video demonstration of this tool

Builder Your Own Heater Tool Demonstration

Series Designation

  • --
  • Cool Touch Heat Torch™ 050
  • Cool Touch Heat Torch™ 150
  • Cool Touch Heat Torch™ 200
+

Wattage

  • --
  • 100
  • 150
  • 200
  • 250
  • 300
  • 350
  • 400
  • 450
  • 500
  • 1000
  • 1500
  • 2000
  • 2250
  • 2500
  • 3000
  • 3500
  • 4000
  • 4250
  • 4500
  • 5000
  • 5500
  • 6000
  • 6500
  • 7000
  • 7500
  • 8000
  • 8500
  • 9000
  • 9500
  • 10000
  • 10500
  • 11000
  • 11500
  • 12000
+

Voltage

  • --
  • 100
  • 120
  • 200
  • 240
  • 400
  • 480
+

Phase

  • --
  • single
  • three

Inlet Fitting

  • --
  • Counterbored 1/2"
  • 1/8" NPT female
  • 1/2" NPT female
  • 1" NPT female
  • R1/8 = 1/8-28 BSPT female
  • R1/2 = 1/2-14 BSPT female
  • R1 = 1-11 BSPT female
+

Exhaust Fitting

  • --
  • no fitting
  • 1/4" NPT female
  • 1/2" NPT female
  • 1" NPT female
  • 1 1/4 NPT female
  • R1/4 = 1/4-19 BSPT female
  • R1 = 1-11 BSPT female
  • R1 1/4 = 1 1/4-11 BSPT female
+

Thermocouple Fitting

  • --
  • no t/c fitting
  • fitting with 1 t/c
  • fitting with 2 t/c
  • 1 t/c fitting without t/c
  • 2 t/c fittings without t/c

Part Number: ? - ? - ? - ? - ? - ? - ?

 

 

 

Sie sind sich nicht sicher, ob dies die richtige Lösung für Sie? Nutzen Sie unsere Bestimmen Sie Ihre Heizung Tool, um zu sehen, die Heizungen Ihren Bedürfnissen.